---
title: "Device Status Code"
slug: "device-status-code-2-1-1"
updated: 2025-01-07T16:37:55Z
published: 2025-01-07T16:39:30Z
canonical: "docs-linescan.alliedvision.com/device-status-code-2-1-1"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs-linescan.alliedvision.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Device Status Code

The Device status code is organized in two parts. The upper two bytes define a status category. The lower two bytes define the specific status that occurred in this category.

## Device Status Category (Upper 2 bytes)

This section contains an overview of the status categories codes. This is again divided into 2 parts. The upper 1 byte contain the error category.

| **Definition** | **Value** | **Description** |
| --- | --- | --- |
| NO_ERROR | 0x00 | No error status category |
| WARNING | 0x01 | Warning status category |
| ERROR | 0x02 | Error status category |

The lower 1 byte contain the component code:

| **Definition** | **Value** | **Description** |
| --- | --- | --- |
| SYSTEM | 0x00 | System status category |
| ILLUMINATION | 0x01 | Illumination status category |
| SENSOR | 0x02 | Sensor status category |
| TRANPORT LAYER | 0x03 | Transport layer status category |

## Specific status (Lower 2 bytes)

This section contains the specific status codes (lower part of the DeviceStatusCode) grouped by the category. This again divided into 2 parts. The upper 1 byte for the specific component id and lower 1 byte for the error code.

1. **System and Illumination**

| **Definition** | **Value** | **Description** |
| --- | --- | --- |
| DEV_STATUS_OK | 0x0000 | OK |
| DEV_STATUS_WARNING_ TEMPERATURE_TOO_HIGH | 0x0001 | Warning: Device temperature high. |
| DEV_STATUS_ERROR_ TEMPERATURE_TOO_HIGH | 0x0002 | Error: Device temperature too high. |
| DEV_STATUS_ERROR_ILLUM_ TEMPERATURE_TOO_HIGH | 0x0003 | Error: Illumination temperature too high. |
| DEV_STATUS_ERROR_ILLUM_LED_ERROR | 0x0004 | Error: Illumination Error. |

1. **Sensor**

- ax_X

| **Definition** | **Value** | **Description** |
| --- | --- | --- |
| SENSOR_STATUS_AX_BLACK_LEVEL_WARNING | 0x0001 | Failure in black level control. The black level may be invalid. |

- g8_X

| **Definition** | **Value** | **Description** |
| --- | --- | --- |
| SENSOR_STATUS_G8_PGOOD_ERROR | 0x0101 | Error: g8 sensor PGOOD error. |
| SENSOR_STATUS_G8_TRAINING_DONE_ERROR | 0x0102 | Error: g8 sensor training done error. |
| SENSOR_STATUS_GX_BLACK_LEVEL_WARNING | 0x0103 | Failure in black level control. The black level may be invalid. |

- p6_nxge

| **Definition** | **Value** | **Description** |
| --- | --- | --- |
| SENSOR_STATUS_P6_TRAINING_DONE_ERROR | 0x0201 | Error: p6 sensor training done error. |
| SENSOR_STATUS_P6_INIT_ERROR | 0x0202 | Error: p6 sensor initialization error |
| SENSOR_STATUS_PX_BLACK_LEVEL_WARNING | 0x0203 | Failure in black level control. The black level may be invalid. |

1. **Transport layer**

- CXP

| **Definition** | **Value** | **Description** |
| --- | --- | --- |
| TL_STATUS_WARNING_CXP_LINK_CONFIGURATION | 0x0301 | Warning: Cxp link configuration invalid. |

- GigE

| **Definition** | **Value** | **Description** |
| --- | --- | --- |
| TL_STATUS_WARNING_LICENSING_ AUTHENTICATION_FAILED | 0x0401 | Warning: License authentication failed. It is in evaluation mode, the stream channel will be closed after 20-30min. |

Feature available allPIXA evo 10/15K DXGE and 10/15K CXP

Feature available for allPIXA evo 8K CXP and DXGE

Feature available for allPIXA neo

CoaXPress (CXP) is an asymmetric high-speed point-to-point serial communication standard for the transmission of video and still images, scalable over single or multiple coaxial cables.

Gigabit Ethernet

Enables easy connection of industrial cameras by using the Gigabit Ethernet standard